I managed to find out a secret setting within the 877 to fine tune the SNR margin if you are having stability issues maintaining adsl line sync.
Go into global configuration mode and type the following:
service internal
int atm 0
dsl noise-margin (a value between -3 and 3)
The service internal command exposes the dsl noise-margin command (and other hidden/non standard commands). The dsl noise-margin forces the router to training at a higher noise margin (sacrificing speed for stability). Setting this to 3 for example should see you get a higher noise margin, slower speed (and depending on firmware) a higher attenuation.
Start at 3 and work your way down to 0 in 0.5 steps until you get a stable connection. A value of 0 is the same as not having this command at all (eg: normal settings).
If you add a dsl noise-margin command, after a reload you’ll see “WARNING: Unsupported Command. May cause violation to ADSL standards.” on bootup, ignore it, it’s just the addition of the noise-margin command.
Use the dsl noise-margin command to fine tune your connection to get that extra stability if required.
[ad#googleadd1]
2 Comments