Press "Enter" to skip to content

Tag: cisco aironet 1140

Cisco Aironet Series 1140

Hey everyone, welcome to 2010 🙂

In the last week I managed to score myself a Cisco Aironet Series 1140 access point. Now it is standalone since its only going to be used for a single AP setup without any wireless controllers.

The model which I got is the – AIR-AP1142N-N-K9 and also I had to get with it a powersupply AIR-PWR-B=.

As taken from the cisco website..

The Cisco® Aironet® 1140 Series Access Point is a business-ready, indoor access point designed for simple deployment and energy efficiency. The 1140 Series is a dual-band (a/g/n), 802.11n access point with integrated antennas. It can be ordered in a controller-based* (lightweight) or Standalone (autonomous) version. “

I must say im quite impressed by this AP, the performance and features make it really outstanding. The access point is “Made in the USA” so none of that made in china stuff..

A show version from the console:

Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 12.4(21a)JA1, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 16-Sep-09 18:09 by prod_rel_team

ROM: Bootstrap program is C1140 boot loader
BOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(18a)JA, RELEASE SOFTWARE
(fc4)

cisco AIR-AP1142N-N-K9     (PowerPC405ex) processor (revision A0) with 98294K/32
768K bytes of memory.
Processor board ID FTX1350S0AG
PowerPC405ex CPU at 586Mhz, revision number 0x147E
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radio(s)

The access point is configurable by console and by a webpage interface. I must say the webpage interface is quite easy to use, and so is the AP.

I have taken some screenshots of the webpage interface below, and some shots of the AP. It gets a 10/10 from me, and of course the AP is nicely connected to that 2960G switch 🙂 (click on images to make them larger)

[ad#googleadd1]

6 Comments