Press "Enter" to skip to content

//> A L C A T R O N . N E T //> Posts

Cisco 877 & Billion 7402R2M SNMP OIDs

Published December 25, 2008

Did you ever want to use the power of SNMP to create graphs with Cacti, MRTG etc? I’ll make you’re life a bit easier by posting the OIDs used by Cisco 877 & Billion 7402R2M modems to get line speed, SNR, attenuation etc

Cisco 877 SNMP OIDS (These work with the latest IOS image  (C870-ADVSECURITYK9-M), Version 12.4(22)T

.1.3.6.1.2.1.10.94.1.1.3.1.8.12 = line speed out
.1.3.6.1.2.1.10.94.1.1.2.1.8.12 = line speed in
.1.3.6.1.2.1.10.94.1.1.3.1.7.12 = output power out
.1.3.6.1.2.1.10.94.1.1.2.1.7.12 = output power in
.1.3.6.1.2.1.10.94.1.1.3.1.5.12 = attenuation down
.1.3.6.1.2.1.10.94.1.1.2.1.5.12 = attenuation up
.1.3.6.1.2.1.10.94.1.1.3.1.4.12 = SNR down
.1.3.6.1.2.1.10.94.1.1.2.1.4.12 = SNR up

Billion 7402R2M SNMP OIDS (These work with the latest firmware 5.60c)

.1.3.6.1.2.1.10.94.1.1.2.1.5.3 = downstream attenuation
.1.3.6.1.2.1.10.94.1.1.3.1.5.3 = upstream attenuation
.1.3.6.1.2.1.10.94.1.1.2.1.4.3 = downstream SNR
.1.3.6.1.2.1.10.94.1.1.3.1.4.3 = upstream SNR
.1.3.6.1.2.1.10.94.1.1.4.1.2.3 = line speed downstream
.1.3.6.1.2.1.10.94.1.1.5.1.2.3 = line speed upstream

[ad#googleadd1]

2 Comments

SNMPget & SNMPwalk

Published November 19, 2008

Lets say in your network you have a lot of routers/switches and when you perform a traceroute you dont know what the hostname is of each device, or for example you need to know more information on the device and what IOS/firmware its running, and what ip addresses are assigned.

For example I need to know what 192.168.1.1 is in my network, and say I have SNMP enabled on my devices we can use a mix of SNMPget and SNMPwalk to find more details. Now this can only be performed on linux, so in this case i am using ubuntu.

root@ubuntu:~# snmpget -v 2c -c public 192.168.1.1 sysName.0
SNMPv2-MIB::sysName.0 = STRING: dd-wrt
sysName.0 shows the device name

root@ubuntu:~# snmpget -v 2c -c public 192.168.1.1 sysDescr.0
SNMPv2-MIB::sysDescr.0 = STRING: Linux DD-WRT 2.4.35 #2005 Tue May 20 01:17:43 CEST 2008 mips
sysDescr.0 shows the firmware used on device and version

root@ubuntu:~# snmpwalk -c public -v1 192.168.1.1 ipaddr
IP-MIB::ipAdEntAddr.192.168.1.1 = IpAddress: 192.168.1.1
IP-MIB::ipAdEntAddr.200.100.1.1 = IpAddress: 200.100.1.1
IP-MIB::ipAdEntAddr.127.0.0.1 = IpAddress: 127.0.0.1
IP-MIB::ipAdEntAddr.169.254.255.1 = IpAddress: 169.254.255.1
IP-MIB::ipAdEntIfIndex.192.168.1.1 = INTEGER: 7
IP-MIB::ipAdEntIfIndex.200.100.1.1 = INTEGER: 77
IP-MIB::ipAdEntIfIndex.127.0.0.1 = INTEGER: 1
IP-MIB::ipAdEntIfIndex.169.254.255.1 = INTEGER: 7
IP-MIB::ipAdEntNetMask.192.168.1.1 = IpAddress: 255.255.255.0
IP-MIB::ipAdEntNetMask.200.100.1.1 = IpAddress: 255.255.255.255
IP-MIB::ipAdEntNetMask.127.0.0.1 = IpAddress: 255.0.0.0
IP-MIB::ipAdEntNetMask.169.254.255.1 = IpAddress: 255.255.0.0
IP-MIB::ipAdEntBcastAddr.192.168.1.1 = INTEGER: 1
IP-MIB::ipAdEntBcastAddr.200.100.1.1 = INTEGER: 1
IP-MIB::ipAdEntBcastAddr.127.0.0.1 = INTEGER: 1
IP-MIB::ipAdEntBcastAddr.169.254.255.1 = INTEGER: 1

snmpwalk shows what ip addresses are on that device

  • Note in all the above cases the device has to have SNMP enabled, in corporate networks i would suggest enabling this feature however having a different read-only snmp string other than public due to security implications. Also it is important to know there is 3 types of SNMP versions v1,v2,v3, so you can set it up depending what the device supports. v2 of SNMP is quite common on many devices.

If you wish to know more information on the above utilities visit the websites below:

SNMP Walk:
http://net-snmp.sourceforge.net/docs/man/snmpwalk.html

SNMP Get:
http://net-snmp.sourceforge.net/docs/man/snmpget.html

General SNMP Info:
http://en.wikipedia.org/wiki/Simple_Network_Management_Protocol

[ad#googleadd1]

Leave a Comment